EN
SR EN ISO 898-1:2002
Caracteristici mecanice ale elementelor de asamblare executate din oţel carbon şi oţel aliat. Partea 1: Şuruburi parţial şi complet filetate şi prezoane
This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1). Properties will vary at higher and lower temperature. This part of ISO 898 applies to bolts, screws and studs - with nominal thread diameter [d ? 39 mm] (coarse and fine pitch); - with triangular ISO thread according to ISO 68; - with diameter/pitch combinations according to ISO 261 and ISO 262; - with thread tolerance according to ISO 965-1 and ISO 965-2; - of any shape; - made of carbon steel or alloy steel. It does not apply to set screws and similar threaded fasteners (see ISO 898-5). It does not specify requirements for such properties as - wedability; - corrosion-resistance (see ISO 3506); - ability to whistand temperatures above + 300 oC or below - 50 oC. NOTE : The designation system of this part of ISO 898 may be used for sizes outside the limits laid down in the clause (e.g. d > 39 mm), provided that all mechanical requirements of the property classes are met.
Status :
Anulat
Data aprobării : 04.12.2002
Data publicării : 15.12.2003
Data anulării : 30.09.2009
Număr de pagini : 38
ICS : 21.060.10 Suruburi, prezoane, stifturi filetate
Comitet tehnic : 59 - Maşini-unelte şi scule, organe de asamblare şi rulmenţi
- Indicat la referinte SR EN 26157-3:2000
- Indicat la referinte STAS 492/2-85
- Indicat la referinte SR ISO 273:1994
- Indicat la referinte SR EN 20898-7:1997
- Indicat la referinte SR EN ISO 898-5:2002
- Indicat la referinte STAS 492/1-85
- Indicat la referinte SR EN 26157-1:1999
- Inlocuit prin SR EN ISO 898-1:2009
- Conflictual cu STAS 2700/3-89