EN
SR EN 61969-2:2012
Structuri mecanice pentru echipamente electronice. Carcase pentru utilizare în exterior. Partea 2: Dimensiuni de coordonare
IEC 61696-2:2011 applies to the design of enclosures for outdoor applications for stationary use at non-weatherprotected locations as defined in IEC 61969-1 Ed.2.0. The internal and external coordination dimensions are derived from IEC 60917-2. The internal dimensions meet the mounting dimensions of subracks in accordance with IEC 60917-2-2 and IEC 60297-3. The external dimensions, compared to IEC 60917-2, are partly increased in order to meet the design requirements of the outdoor specific conditions. This second edition cancels and replaces the first edition issued in 2000. It constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: It was the intention when IEC 61969-2 Ed 1.0 was created that a sectional standard is to be followed by a detail standard, consisting of IEC 61969-2-1 and IEC 61969-2-2. The intention of detail standards was to create a recommended but cost-effective range of outdoor enclosure solutions offered from multiple vendors. However, it became evident that the outdoor enclosure applications were ext
Status :
In vigoare
Data aprobării : 31.08.2012
Număr de pagini : 24
ICS : 31.240 Structuri mecanice pentru echipament electronic
Comitet tehnic : 145 - Conectoare, dispozitive de conectare, ghiduri de undă şi structuri mecanice pentru echipament electric şi electronic
- Inlocuieste SR EN 61969-2-1:2002
- Inlocuieste SR EN 61969-2:2002
- Inlocuieste SR EN 61969-2-2:2002