EN
SR EN ISO 15156-3:2010
Industriile petrolului şi gazelor naturale. Materiale pentru utilizare în prezenţa H2S în producţia de petrol şi gaze naturale. Partea 3: Aliaje rezistente la fisurarea prin coroziune CRA (aliaje rezistente la coroziune) şi alte aliaje
ISO 15156-3:2009 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. ISO 15156-3:2009 can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. ISO 15156-3:2009 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically induced hydrogen stress cracking (GHSC). ISO 15156-3:2009 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. A non-exhaustive list of equipment is given to which this part of ISO 15156 is applicable, including permitted exclusions. ISO 15156-3:2009 appli
Status :
Anulat
Data aprobării : 31.03.2010
Data publicării : 02.04.2010
Data anulării : 29.02.2016
Număr de pagini : 84
ICS : 75.180.01 Masini si utilaje pentru industria petroliera si a gazului natural în general
Comitet tehnic : 169 - Materiale, echipament şi structuri pentru industriile petrolului şi gazelor naturale
- Inlocuieste SR EN ISO 15156-3:2004/AC:2006
- Inlocuieste SR EN ISO 15156-3:2004
- Inlocuit prin SR EN ISO 15156-3:2016