EN
SR EN ISO 2409:2007
Paints and varnishes - Cross-cut test (ISO 2409:2007)
ISO 2409:2007 describes a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property measured by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the substrate. This procedure is not to be regarded, however, as a means of measuring adhesion. The method described may be used either as a pass/fail test or, where circumstances are appropriate, as a six-step classification test. When applied to a multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made. The test can be carried out on finished objects and/or on specially prepared test specimens. The method is not suitable for coatings of total thickness greater than 250 micrometres or for textured coatings.
Status :
Withdrawn
Approval date : 10/30/2007
Publish date : 11/1/2007
Withdrawal date : 7/31/2013
Number of pages : 18
ICS : 87.040 Paints and varnishes
Technical Committee : 338 - Adhesives
- Replaces SR EN ISO 2409:2003
- Replaces SR ISO 2409:1994/A99:2003
- Replaces SR ISO 2409:1994
- Normative reference SR EN ISO 2808:2007
- Normative reference SR EN ISO 1513:2003
- Normative reference SR EN 60454-2:2008
- Normative reference SR EN ISO 15528:2001
- Normative reference SR EN ISO 1514:2005
- Replaced by SR EN ISO 2409:2013