EN
SR EN 60332-1-2:2005
Tests on electric and optical fibre cables under fire conditions. Part 1-2: Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1kW pre-mixed flame
Specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions. The apparatus is given in EN 60332-1-1. NOTE 1 Testing to EN 60332-1-2 may be performed simultaneously with that to EN 60332-1-3 if required. Recommended requirements for performance are given in Annex A. EN 60332-1-2 specifies the use of a 1 kW pre-mixed flame and is for general use, except that the procedure specified may not be suitable for the testing of small single insulated conductors or cables of less than 0,5 mm2 total cross-section because the conductor melts before the test is completed, or for the testing of small optical fibre cables because the cable is broken before the test is completed. In these cases, the procedure given in EN 60332-2-2 is recommended. NOTE 2 Since the use of insulated conductor or cable which retards flame propagation and complies with the recommended requirements of this standard is not sufficient by itself to prevent propagation of fire under all condi
You must log in to add this product to favorites.
Status :
Valid
Approval date : 9/30/2005
Publish date : 10/2/2005
Number of pages : 14
ICS : 13.220.40 Ignitability and burning behaviour of materials and products,29.020 Electrical engineering in general,29.060.20 Cables
Technical Committee : 159 - Electric cables
- Replaces SR EN 50265-2-1:2001
- Normative reference SR EN 60332-1-1:2005
- Normative reference SR EN 60695-4:2002
- Amended by SR EN 60332-1-2:2005/A11:2017
- Amended by SR EN 60332-1-2:2005/A1:2016
- Amended by SR EN 60332-1-2:2005/A12:2021